INTERFACE RELAY MARCA CRESTRON MODELO DIN-8SW8-I
INTERFACE RELAY MARCA CRESTRON MODELO DIN-8SW8-I
Cód: DIN-8SW8-I
Gostou? Então compartilhe para seus amigos!
| Load Ratings | ||
| Switch Channels | 8 | |
| Maximum Per Channel | 10 Amps incandescent, 5 Amps fluorescent, 0.5 HP at 120 to 240 Volts AC, 50/60 Hz; 5 Amps at 30 Volts DC; 16 Amps Resistive | |
| Module Total | 80 Amps incandescent, 40 Amps fluorescent at 120 to 240 Volts AC, 50/60 Hz | |
| Load Types[1] | Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motor | |
| Connections | ||
| 1 – 8 | (8) Sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 8; Relay Rating: 10 Amps incandescent, 5 Amps fluorescent, 16 Amps resistive, 0.5 HP at 240 Volts AC (per channel); Maximum Wire Size: 12 AWG (2.5 mm²) | |
| INPUTS 1-8 | (9) 3.5 mm detachable terminal blocks (inputs 1-8, common); Rated for 12-24 Volts DC; Input Impedance: 6.8k Ohms | |
| NET | (2) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet® slave port | |
| OVERRIDE | (2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10 mA (per module) at 24 Volts | |
| Controls & Indicators | ||
| 1 – 8 | (8) Red LEDs and (8) miniature pushbuttons for status indication and local control of each channel | |
| NET ID | (2) 7-segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID | |
| SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling Setup mode and entering touch-settable ID | |
| OVR | (1) Red LED and (1) miniature pushbutton for enabling Override mode and saving override presets | |
| PWR | (1) Green LED, illuminates when DC power is applied to the NET port | |
| NET | (1) Yellow LED, indicates communication with the control processor | |
| RESET | (1) Recessed miniature pushbutton, resets internal processor | |
| Enclosure | ||
| Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm) | ||
| Power Requirements | ||
| Cresnet Power Usage | 5.4 Watts (0.23 Amps at 24 Volts DC) | |
| Environmental | ||
| Temperature | 32° to 104° F (0° to 40° C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 18 BTU/hr | |
| Dimensions | ||
| Height | 3.71 in (94 mm) | |
| Width | 6.26 in (159 mm) | |
| Depth | 2.35 in (60 mm) | |
| Weight | ||
| 13.1 oz (369 g) | ||
Avaliações
0
Não há comentários para este produto.
Faça você a sua avaliaçao sobre este produto
Sua avaliação para este produto*
CENTRAL DE CONTROLE MARCA CRESTRON MODELO CP3
CommunicationsEthernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duple..
de R$22.921,00 por
R$21.775,42 à vista
à vista no boleto com 5% de desconto
INTERFACE IO MARCA CRESTRON MODELO DIN-IO8 2
Connections I/O 1 – 8(2) 5-pin 3.5mm detachable terminal blocks comprising (8) digital input/ou..
de R$4.129,00 por
R$3.922,55 à vista
à vista no boleto com 5% de desconto
INTERFACE DANTE ™ COM 4 CANAIS DE ENTRADA MIC / LINE, COM CONECTOR BLOCK ANI4OUT-XLR
Características principaisQuatro saídas analógicas XLRPorta Ethernet ÚnicaLEDs indicam status do dis..
de R$8.462,49 por
R$8.059,52 à vista
à vista no boleto com 5% de desconto